 |
Rebel Steel Steering Guard to fit Landrover Defender / 90 / 110
| NOW
with Towing Eyes RHD |
£46.00 |
|
|
| |
|
|
| |
|
|
| |
|
|
|
Our steering guards will withstand the hardest of knocks and will enhance the vehicle's looks.
They are made from 5mm mild steel plate, are fully welded and one piece. They are drilled for engine ventilation, have a PSU Zinc finish. Diff Guards are sold separately - see below.
 |
Unbranded Steel Steering Guard Welded to fit Landrover Defender / 90 / 110 RHD
| Landrover
Defender / 90 / 110 RHD |
£39.00
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
90/110 5MM Gold Passavate Steel Steering Guard, non branded which bolts straight on to the chassis within 5 minutes. Excellent protection at a low cost.
 |
Reinforced Rebel Guard to fit Landrover Defender /90 / 110 RHD
| Landrover
Defender /90 / 110 RHD |
£58.50
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
Rebel Steering Guard - Heavy Duty version. This steering guard is the same as our standard steering guard, but with a difference of a 5mm angled plate welded along the back giving unbelievable strength and protection. Available in either a gold passavate or a PSU Zinc finish.
 |
REBEL Steering Guard to fit Landrover Series II/III
| Landrover
Series II/III |
£34.00
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
Made from 5mm mild steel plate. fully welded Rebel Steering Guard with a PSU Zinc finish or gold passavate finish. Available in both left and right hand drive.
 |
Aluminium Steering Guard (10mm brackets) to fit Landrover Defender / 90 / 110 /LHD/RHD
| Landrover
Defender / 90 / 110 /LHD/RHD |
£96.00
|
|
|
| |
|
|
| |
|
|
|
Rebel 4x4's Aluminium Steering Guards fit 90/110/LHD/RHD models. They come in three seperate pieces which includes a base plate and two brackets. Available as an 8mm aluminium or 6mm steel face plate and heavy duty 10mm steel brackets with two built in recovery eyes.
The best on the market and most definately the cheapest. Diff Guards are sold separately - Click Here
| |
Steel Steering Guard (3 piece with towing eyes) to fit Landrover Defender / 90 / 110 /LHD/RHD
| Landrover
Defender / 90 / 110 /LHD/RHD |
£77.00
|
|
|
| |
|
|
| |
|
|
|
 |
Heavy Duty Aluminium Guard to fit Landrover Defender / 90 / 110 /LHD/RHD
| Landrover
Defender / 90 / 110 /LHD/RHD |
£129.00
|
|
|
| |
|
|
| |
|
|
|
Steering Guard for the serious off roader. As picture one shows you get 8mm brackets complete with towing eyes and then a sub frame welded between the two brackets, a 5mm base plate with a 3mm top plate which is all then gold passavated. As picture two shows you get an 8mm aluminium plate which bolts to the steel plate.You only normally see this type of armourment on the front of tanks! Brilliant value. Diff Guards are sold separately - see below.
 |
Tank Guard to fit Landrover Defender / 90 - TD / 200 TDI / 300 TDI
Landrover
Defender / 90 - TD /
200 TDI / 300 TDI |
£87.50
|
|
|
| |
|
|
| |
|
|
|
 |
Tank Guard to fit Landrover Defender / 90 - Td5/LHD/RHD
| Landrover
Defender / 90 - Td5/LHD/RHD |
£53.50
|
|
|
| |
|
|
| |
|
|
|
 |
Jate Ring
|
Jate Rings: ideal for vehicle recovery, very strong, The side bars are 25mm x 10mm and are laser cut with a 16.5mm hole lasered into the bottom of the bar to except a 16mm round bar which is then fully welded and then coated in gold passavate.
 |
Diff Guard to fit Defender / 90 / 110
| Landrover
Defender / 90 / 110 |
£19.00
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
| |
Salisbury Diff Guard (for 110 rear axel)
| Landrover
Defender 110 rear axel |
£24.50
|
ADD
TO CART
|
|
| |
|
|
| |
|
|
| |
|
|
|
This fully welded bolt on Diff Guard is made from 5mm steel and has a galvanized finish. It fits all Rover Axles front and Rear including 90/110/ Series/Discovery and Range Rover models and takes only five minutes to fit.
All photographs on this web site belong to Rebel 4 x 4
and may not be distributed or reproduced by any means,
or in any form, without Rebel 4 x 4 prior written permission.
ALL OF OUR NEW PRODUCTS ARE PATENTED |
