The powder used for this MATT BLACK coating is a mixture of finely ground particles of pigment and resin, which is sprayed onto the aluminium. The charged powder particles adhere to the electrically grounded surfaces until heated and fused into a smooth coating in a curing oven. The result is a uniform, durable, high-quality, and attractive finish.
Powder coated surfaces are more resistant to chipping, scratching, fading, and wearing than many other finishes.
 |
MATT BLACK Chequer Wing Top protectors
to fit Landrover Defender 90 / 110 - TD / 200 / 300TDI
/ TD5
| 2mm (per pair) |
£39.50
|
|
| |
|
|
| 3mm (per pair) |
£47.50
|
|
| |
|
|
|
Our laser cut 90/110/127/130 wing top protectors
are the easiest and most convenient way of protecting the
wings of your vehicle. All of our wing tops are pre-drilled
for ease of fitment and lightly coutersunk to accept pop rivets*.
They are also, double rolled to ensure correct alignment and
sanded to prevent personal injury. Rebel 4x4's five - bar
tread plate wing top protectors give added strength to your
wings concealing ugly dents and scratches whilst enhancing
your vehicle's looks.
| |
MATT BLACK Chequer Wing Top protectors
to fit Landrover Defender Puma
|
| |
MATT BLACK Chequer Wing Top protectors
to fit Landrover Series II/III
| 2mm (per pair) |
£39.50
|
|
| |
|
|
| 3mm (per pair) |
£47.50
|
|
| |
|
|
|
These laser cut ready to fit aluminium
wing top protectors for Series II/III Landrovers are rolled
and rounded at the front corners allowing them to fit neatly
on to the vehicles' wing. They are pre-drilled and lightly
coutersunk to accept pop rivets*.
 |
MATT BLACK Chequer Bonnet Protector
to fit Landrover Defender 90/110 - TD / 200 / 300TDI
/ TD5
|
Rebel 4x4's standard bonnet protector for
90/110/127/130 models will improve your vehicles appearance
and safe guard the bonnet from being damaged when using it
to access the roof of your vehicle. This protector is also
pre-drilled and lightly coutersunk to accept pop rivets*.
It has a rolled front edge to give it a snug fit in the recess
of the bonnet.
It is also possible to remount your spare wheel carrier on
top of this protector.
 |
Full Chequer Bonnet Protector MATT
BLACK to fit Landrover Defender 90/110 - TD / 200 /
300TDI / TD5
| Full Bonnet Protector |
£110.00
|
|
| |
|
|
|
For maximum coverage of your bonnet we have
fabricated a Full Bonnet Protector which offers the utmost
protection as this is manufactured using heavy duty (3mm)
aluminium. Again it is pre-drilled for ease of fitting and
lightly coutersunk to accept pop rivets* . We recommend the
use of expanding filler foam in the recess of the bonnet to
complete fitment.
| |
MATT BLACK Chequer Bonnet protector
to fit Landrover Defender Puma
|
|
Other BLACK MATT Chequer Plate Products
(Matt Black)
| Bumper
Tread Plates Short |
|
£10.00
|
|
|
|
|
| 90/Ser III SWB Sill
Protectors 2mm |
|
£30.50
|
|
|
|
|
| 110 Van Type Sill Protectors
2mm |
|
£36.50
|
|
|
|
|
| 110 County Sill Protectors
2mm |
|
£36.50
|
|
|
|
|
| 90 Rear Corner Protectors
2mm |
|
£15.50
|
|
|
ADD TO CART |
|
| Series II/III SWB Rear
Corner 2mm |
|
£14.00
|
|
| ADD
TO CART |
|
| 110 Van/County Rear
Corner Protectors 2mm |
|
£24.00
|
|
| ADD
TO CART |
|
| 90/110 Rear Crossmember
Cover 2mm |
|
£31.50
|
|
| ADD
TO CART |
|
| Series III Rear Crossmember
Cover 2mm |
|
£31.50
|
|
| ADD
TO CART |
|
| Door Trims |
|
£13.00
|
|
| ADD
TO CART |
|
| 90 Door Trim Set |
|
£60.00
|
|
| ADD
TO CART |
|
| 90/Ser III SWB Sill
Protectors 3mm |
|
£39.50
|
|
| ADD
TO CART |
|
| 110 Van Type Sill Protectors
3mm |
|
£47.50
|
|
| ADD
TO CART |
|
| 110 County Sill Protectors
3mm |
|
£47.50
|
|
| ADD
TO CART |
|
| 90 Rear Corner Protectors
3mm |
|
£22.00
|
|
| ADD
TO CART |
|
| 110 Van/County Rear
Corner Protectors 3mm |
|
£28.00
|
|
| ADD
TO CART |
|
| Mudflap Brackets 3mm |
|
£16.00
|
|
| ADD
TO CART |
|
| Door Cover without
wiper motor cut out (2mm) |
|
£42.50
|
|
| ADD
TO CART |
|
| Door Cover with wiper
motor cut out (2mm) |
|
£46.00
|
|
| ADD
TO CART |
|
| Door Cover with wiper
motor cut out & chequer plate covers for wiper
motor, door lock and stay bar |
|
£71.80
|
|
| ADD
TO CART |
|
|
 |
Clear Silicon Sealant
| Clear
Silicon Sealant |
£1.50 |
|
| |
|
|
|
|
|
As an optional extra we now offer
a clear sealant which can be used around the edges of
the chequer plate to create a seal between the chequer
plate panels and bodywork.
|
*Pop rivets not included
All photographs on this web site belong to Rebel 4 x 4
and may not be distributed or reproduced by any means,
or in any form, without Rebel 4 x 4 prior written permission.
ALL OF OUR NEW PRODUCTS ARE PATENTED |