|
|
| |
| 9.5XP
SPECS/PART NUMBERS |
| Part Number: PN
68500 (12V DC) |
| Rated Line Pull: 9500
lbs. (4310 kgs.) single-line |
| Motor: 12V
6 hp, High Output Parallel Series Wound |
| Remote Control: Remote
switch, 12' (3.7m) lead |
| Geartrain: 3-Stage
Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell
#17 |
| Clutch (freespooling): Sliding
Ring Gear |
| Brake: Automatic
Direct Drive Cone |
| Wire Rope: 100',
5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Recommended
Battery: 650 CCA minimum for winching |
| Battery Leads: 2
gauge, 72" (1.83m) |
| Finish: Chromate
with high-gloss dark gray powder coat |
| Drum
Diameter/Length: 2.5"/9.0"
(6.4cm/23cm) |
| Weight: 87
lbs. (39.5 kgs.) |
|
| 12V
DC PERFORMANCE SPECS |
Line
Pull
Lbs.(Kgs.) |
Line
Speed
FT./min(M/min.) |
Motor
Current |
Pull
by layer
layer/Lbs(Kgs.) |
| 0 |
38(11.6) |
70 amps |
1/9500(4313) |
| 2000(910) |
16.8(5.1) |
175 amps |
2/8650(4927) |
| 4000(1818) |
12.8(3.9) |
262 amps |
3/7920 (3595) |
| 6000(2720) |
10.1(3.1) |
335 amps |
4/7400(3359) |
| 8000(3630) |
8.8(2.7) |
425 amps |
5/6940(3150) |
| 9500(4310) |
7.6(2.3) |
480 amps |
|
|
| |
| Above performance specs are
based on first layer of drum |
|
Winch Dimensions: 22.7"
L. x 6.3" D. x 7.7" H.
(577mm L. x 160mm D. x 196 mm H) |
| Mounting Bolt
Pattern: 10.0" x
4.5" (254mm x 114.3mm) |
|
|
| |
All photographs on this web site belong to Rebel 4 x 4
and may not be distributed or reproduced by any means,
or in any form, without Rebel 4 x 4 prior written permission.
ALL OF OUR NEW PRODUCTS ARE PATENTED
|
