|
|
 |
| 9.5ti
SPECS/PART NUMBERS |
| Part Number: PN
67550 (12V DC) |
| Rated Line
Pull: 9500 lbs. (4310
kgs.) single-line |
| Motor: Gen
II, Series WoundTM |
| Remote
Control: Remote switch,
12' (3.7m) lead |
| Geartrain: 3-Stage
Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell
#17 |
| Clutch (freespooling): Sliding
Ring Gear |
| Brake: Automatic
Direct Drive Cone |
| Drum
Diameter/Length: 2.5"/9.0"
(6.4cm/23cm) |
| Weight: 89
lbs. (36.3kgs.) |
| Wire Rope: 125',
5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Recommended
Battery: 650 CCA
minimum for winching |
| Battery
Leads: 2 gauge,
72" (1.83m) |
| Finish: Chromate
with high-gloss powder coat |
| Nuts/Bolts: PN
39570 |
|
| 12V
DC PERFORMANCE SPECS |
Line
Pull
Lbs.(Kgs.) |
Line
Speed
FT./min(M/min.) |
Motor
Current |
Pull by
layer
layer/Lbs(Kgs.) |
| 0 |
62(18.9) |
47 amps |
1/9500(4313) |
| 2000(910) |
16.3(4.97) |
160 amps |
2/8650(3927) |
| 4000(1810) |
11.8(3.60) |
230 amps |
3/7920(3595) |
| 6000(2720) |
9.31(2.84) |
305 amps |
4/7400(3359) |
| 8000(3630) |
7.59(2.31) |
370 amps |
5/6940(3150) |
| 9500(4310) |
6.67(2.03) |
425 amps |
|
|
| |
| Above performance specs are
based on first layer of drum |
|
Winch Dimensions: 23.1"
L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.) |
| Mounting Bolt Pattern: 10.0"
x 4.5" (254mm x 114.3mm) |
|
| |
|
|
| |
All photographs on this web site belong to Rebel 4 x 4
and may not be distributed or reproduced by any means,
or in any form, without Rebel 4 x 4 prior written permission.
ALL OF OUR NEW PRODUCTS ARE PATENTED
|
